Smart BMS 4S LiFePo4 12V 24V 36V 48V 30A~500A Li-Ion LTO 3S 7S 8S 10S 12S 13S 16S 24S bms balance board bluetooth APP for solar Featured Image
  • Smart BMS 4S LiFePo4 12V 24V 36V 48V 30A~500A Li-Ion LTO 3S 7S 8S 10S 12S 13S 16S 24S bms balance board bluetooth APP for solar
  • Smart BMS 4S LiFePo4 12V 24V 36V 48V 30A~500A Li-Ion LTO 3S 7S 8S 10S 12S 13S 16S 24S bms balance board bluetooth APP for solar
  • Smart BMS 4S LiFePo4 12V 24V 36V 48V 30A~500A Li-Ion LTO 3S 7S 8S 10S 12S 13S 16S 24S bms balance board bluetooth APP for solar

Smart BMS 4S LiFePo4 12V 24V 36V 48V 30A~500A Li-Ion LTO 3S 7S 8S 10S 12S 13S 16S 24S bms balance board bluetooth APP for solar

Short Description:

Model: 24v 100Ah
Type: LIFEPO4 battery pack bms
Rechargeable: YES
Capacity: 100A/Customize
Charge temperature: 0°C ~ 45°C
Application: LIFEPO4 battery pack
Warranty: 5 years
Customize service: Available


Chat Now

Product Detail

Product Tags

Description

◆For our smart bms,when first use,need to activate first,then B- P- can be conductive,voltage from P- can be same from B-, then BMS can work well

Activation method:
Method ①: Purchase the power board,there is an activation switch on the board and click the button.
Method ②: Press thebuttonon the bluetooth module to activate the bms directly.
Method ③: Charge activation, B-line must be connected to the total negative pole of the battery pack when
charging . 3S~5S, J series (10J, 16J ) BMS only can be activated by this way.

Parameters

 

BMS

Structure

BMS (6)

Features

1.The sequence of the protective board connection battery wiring:
Special attention: The wire cable of different manufacturers are not same standard, please make sure to use he matching cables; the colors of B-and P- lines of different manufacturers are different, please pay attention to the B- and P- marks.
1 Remember! ! ! When welding sampling wire cable, do not insert the cable into the BMS.
2.The cable connects the total negative electrode B-from the fine black line. The second wire (red wire) is connected to the positive pole of the first string of batteries.Connect the positive electrode of each string of batteries in turn until the last wire cable of the total positive B+.
3. After the cable is connected, do not insert the plug directly into the BMS.First measure the voltage between each two adjacent metal terminals on the back of the plug. If it is a ternary lithium battery, the voltage should be between 3.0~4.15V, and the iron-lithium battery should be 2.5~ Between 3.6V, lithium titanate battery should be between 1.8~2.8V, make sure the voltage is correct before proceeding to the next step.
4.Receive the BMS B-line (blue thick line) to the total battery negative electro-de (B-line length should not exceed 40cm).
5.Insert the wire cable into the BMS.

 

2. After the wiring is completed:
1.Measure whether the voltage of battery B+, B- is equal to the voltage of B+ and P-(that is, whether the voltage of the battery pack itself is e-qual to the voltage after passing through the protection board, if they are equal, the BMS is working normally, which can be used normally.
If not, please follow Re -check the sequence of the wiring above.
2.The positive electrodes of the charging and discharging end are all directly connected to the total positive pole B+ of the battery; the wiring method of the same port BMS is that the charging and discharging negative poles are connected to the P- point of the BMS; the wiring m-ethod of the branch BMS is the negative pole of charging Connected to
C-, the negative electrode of discharge is connected to P-.
3.Finally, if you have any questions, please contact the customer service to help you solve it.

  • Previous:
  • Next:

    • Products categories